Based on your detected country, we suggest the draperinc.com domain for the best experience.
 

Venetian Blinds by Warema

The Venetian Blinds by Warema shading system creates just the right amount of daylight by preventing glare thanks to the system’s ability to retract, extend, or tilt the slats. Exterior and dual facade applications provide effective solar control and thermal comfort with optimal daylighting. They can be used for new buildings or renovations, and are appropriate for commercial, institutional, retail, and residential applications. There are many options available to fit the needs of your specific project.
  • Automation available for maximum indirect light.
  • Superior solar heat gain control.
  • Standard color options available. Custom powder coat colors optional.
  • Architecturally aesthetic designs.
  • Asymmetrical, dim-out, and wind stable Venetian blinds.
  • Face and top-mounted Venetian blinds.
  • Self-supporting Venetian blinds.
  • Metal system Venetian blinds.
  • Venetian blinds with no ladders and lift cords.
  • External Venetian blinds with flexible or rolled edge slats available.
  • Product designed for interior and exterior use.

If clutch-operated roller shades are installed in an environment where it's possible that young children will be present, they should comply with ANSI/WCMA A100.1, the Standard for Safety of Window Coverings.

If the shades that you purchase need to comply with this standard, it is your responsibility to inform Draper and opt-in to receive compliant products at time of order.

Compliant window shades will include:

  • Pre-installed spring-loaded chain tension device with bead chain threaded through it
  • Approved permanent warning label attached
  • Approved mechanical fasteners for the tension device included

If the tension device is not installed properly, or becomes unattached from the mounting surface, the shade will be rendered partially inoperable. If installed properly, the tension device will prevent the creation of a hazardous loop and will maintain tension on the bead chain. The tension device and label require tools to be removed.

Testing

The testing required by the WCMA for products to comply with safety standard A100.1 includes:

  • UV stability testing - AATCC Test Method 16 for UV Stability
  • Impact testing - ASTM D5420
  • Bead chain durability testing
  • Operation cycle testing - 3,000 cycles per the standard

Draper's spring loaded tension device passed the requirements of these tests.

WCMA compliant hangtag warning label
 

Quick Feedback

We would love to get your thoughts so don't hesitate to send us your feedback!

Name
Email
What could we improve? (required)